A flexible panel between felt layers, glued to the wall with silicone 20 cm above the floor. Once dry, it is first plastered and then painted: it becomes invisible.
Its main job is to dry out damp walls: the panel works at +50 °C, warms the wall and the damp gradually evaporates. It also heats the room.
Two models at 220 V, IP65: RIN20 · 190 × 65 cm · 620 W (up to 9 m²) and RIN10 · 120 × 65 cm · 390 W (up to 5 m²). The m² depend on the home, the damp and other heating. 20-year warranty.
Buy nowMore than 300 five-star reviews from customers who already have it at home, and 4.6 out of 5 on Google.
| What it is | Flexible heating film, between felt layers, that stays inside the wall |
|---|---|
| What for | To dry out damp walls and, at the same time, heat without being seen |
| Models | RIN20 · 190 × 65 cm · 620 W (up to 9 m²) / RIN10 · 120 × 65 cm · 390 W (up to 5 m²) |
| Power | 500 W per m² of panel |
| Voltage | 220 V · 50 Hz |
| Working temperature | About +50 °C above room temperature |
| Area heated | Up to 9 m² (RIN20) and 5 m² (RIN10): it depends on the layout of the home, the damp and other heating systems |
| Type of heat | NON-luminous infrared |
| Protection | IP65 |
| Installation | Glued to the wall with silicone; left to dry for 24 hours, then plastered and painted |
| Finish | Invisible: smooth plaster, textured or any decorative finish |
| Control | Not included: WiFi thermostat with timer or 16 A wall switch (manual use) |
| Accessories included | Only the connection cables |
| Use | New builds and renovations: homes, offices, shops, basements and garages · dries out damp |
| Weight | 2.2 kg (RIN20) / 1.54 kg (RIN10) |
| Packaging | Box 70 × 10 × 10 cm |
| Barcode | 8425493009200 (RIN20) · 8425493009101 (RIN10) |
| Warranty | 20 years |
| Returns | 90 days |
| Made in | Molina de Segura (Murcia), Spain |
A wide choice of models. If you do not see your size or voltage, ask us: also made to measure.
| Model | Size | Power | Voltage | Barcode |
|---|---|---|---|---|
| RIN20 | 190 × 65 cm · 9 m² | 620 W | 220 V | 8425493009200 |
| RIN10 | 120 × 65 cm · 5 m² | 390 W | 220 V | 8425493009101 |
It is glued to the wall with silicone (a normal cartridge), 20 cm above the floor; if there is a window, under it. Once dry, it is first plastered and then painted with the finish you want (smooth, textured…). An electrician connects it to a 16 A wall switch or a thermostat. Only the connection cables are included.
The RIN20 (190 × 65 cm, 620 W) covers up to 9 m² and the RIN10 (120 × 65 cm, 390 W) up to 5 m². These are guidelines: they depend on the layout of the home, how damp the walls are and other heating systems. Its main job is drying the wall. If in doubt, send us the floor plan.
Both work. With a 16 A wall switch you turn it on and off by hand, like a light. It can also go with a thermostat, but infrared heats people and walls, not the air, so the thermostat measures less well and control is less precise.
Yes. By warming the wall itself, the infrared heat gradually dries it and helps prevent mould. That is why it is very useful when renovating damp homes.
A 20-year manufacturer's warranty, with technical support for installers and architects, and 90 days to return it if it has not been installed.
Join our newsletter: at HERGA ENERGY innovation never stops, and you can be the first to discover it. Offers and special information, no junk mail.